Are you facing problems with the Rockspace extender? For sure your Rockspace extender is not connecting. If we take a test then almost 50% of users are facing the same issue. No worries, we are here with numerous tips to troubleshoot this problem.
Issue Because of The Wrong Passwords
If you have entered the wrong passwords accidentally then, you can easily resolve the issue of rockspace ac750 setup here by login into the portal and changing the passwords of the router or the Rockspace extender. The given troubleshooting tips will resolve this issue for sure.
If your answer is yes then, go through the troubleshooting tips and fix the issues of the Rockspace Extender and router.
Reset Is Necessary If The Extender Can’t Connect?
A reset button will be located at the end of the extender and press it by using a needle. So, press it softly for at least 10-15 seconds. This step is necessary if you are unable to reset the WIFI extender to the router. Once you reset the extender, this will ask for your permission on how to set it up. But if you don’t know, go to the rockspace ac750 setup portal and follow the instructions carefully.
To change the settings of your router and the Rockspace extender, you need to identify the IP address of the router. So, you can easily verify for the other similar network availability in your area. To do the necessary changes you need to change the password and the username of the Rockspace extender and existing router, or you can log in to the portal of re.rockspace.local and easily change the password.
Rockspace Extender Setup Using WPS Method
After resetting the extender, you will need to configure it again. To do this, there is a WPS button on the extender which makes this rockspace ac750 setup easier. The easiest Steps are here to complete the setup of Rockspace.
- Initially, plug the extender into a power socket first and then turn it On.
- After That, press the WPS push button on your extender.
- Then, press the WPS button on the router at the same time.
- The LED Signal will turn blue for sure to ensure that the WPS connection is successful.
- Finally, as you are successful with the connection. So you can connect your WiFi existing router to the extender network to enjoy the extended WiFi signals.
- While doing this, make sure that your router’s WPS button is functioning and that both devices are located in the same room.
Use An Ethernet Wire
Using an Ethernet cable you can connect the device to the router to keep in the journey for a long run. Because there might be an error in the extender’s wireless network, try making a cable connection instead of the wireless one. While connecting an Ethernet wire always keep in mind to check if it is not cut or broken from the edges or between.
Some Changes In The Network
More than that, make some modifications to the network’s advanced settings. Swap the bandwidth channels often as your neighbors might using the same ones. Moreover, verify whether both frequency bands are active or not and are working properly or not. Lastly, check the networked devices that are actually attached to your own router network.
Keep In Mind These Things
If you are using a Rockspace AC750 which is not working, the installation is not correct. Therefore, install the extender as per the guidelines of your extender as mentioned in the manual.
First, place the extender at a center tidy location.
Some electronic items like microwave ovens, and Bluetooth devices, refrigerators and other home security systems need to be kept away from your extender and existing routers.
Although aluminum items like ceiling fans and studs should be kept away from the extenders. Concrete walls and metal doors can all cause damage.
As we have already said above, placing the routers in the corners can definitely affect its performance.
Footnote: You need to disable all the wireless security settings. Sometimes the wireless device is not compatible. When you once disable the security mode you can access the WIFI control again.
In the above article, we have given some exclusive troubleshooting tips which can almost diminish the issue of extender connection. Therefore, follow the tips and tricks carefully as we know they are going to help you.